BAKFlip CS Tonneau Cover & Rack System
The BAKFlip CS tonneau cover & rack delivers the first integrated hard folding cover and rack system engineered for full-size pickups. Our patented design combines weather-sealed bed protection with a 500-pound load capacity rack that deploys in seconds — no tools, no removal, no compromise.
When you need bed access, the lightweight aluminum panels fold completely open and rest securely against the cab. When you need to carry ladders, lumber, kayaks, or rooftop cargo, deploy the integrated rack rails without removing the cover. The CS system mounts flush inside the bed rails for a low-profile look and full tailgate functionality, giving you secure lockable storage one moment and rugged cargo capacity the next.
- 500-lb load capacity integrated rack system with telescoping cross rails
- Hard folding aluminum panels with weather-sealed joints and drain channels
- Mounts inside bed rails — no drilling into bed floor or paint
- Fold panels open for full bed access or deploy rack mode in under 30 seconds
- Locks at tailgate for secure storage; compatible with existing bed rail tie-downs
Materials & Construction
We build the BAKFlip CS from marine-grade aluminum panels reinforced at every hinge point to handle the rigors of daily work and weekend adventure. Each panel features a matte black powder-coat finish baked on at high temperature, creating a durable surface that resists scratches, UV fade, and corrosion from road salt or coastal exposure.
The integrated rack rails are constructed from extruded aluminum with stainless steel hardware at all pivot and locking points. Sealed ball bearings allow the telescoping cross rails to extend smoothly under load, while rubberized contact points protect your cargo from metal-on-metal wear. Every seal, gasket, and drain channel is designed to shed water away from the bed, keeping tools and gear dry through rain, snow, and truck washes.
Rack Deployment & Load Capacity
Rack Mode
Deploy the rack system by releasing two cam levers and lifting the folded panels into the vertical position — the process takes under 30 seconds and requires no tools. The telescoping cross rails extend from 50 inches to 74 inches to accommodate wide loads, and adjustable mounting points let you position cargo exactly where you need it. We rate the system at 500 pounds of evenly distributed weight, suitable for extension ladders, kayaks, canoes, roof boxes, or bundled building materials.
Cover Mode
When rack capacity isn’t needed, simply fold the panels back down flat for a sleek low-profile bed cover. The system locks at the tailgate using an integrated rotary latch, and the folded configuration provides full bed access by resting the panels against the cab window. Whether you’re securing tools overnight or hauling mulch on Saturday, the CS adapts without removing a single component.
Installation & Bed Compatibility
The BAKFlip CS mounts to factory bed rails using clamp-on brackets — no drilling into painted surfaces or bed floors. Installation typically takes 45-60 minutes with basic hand tools and follows our detailed photo instructions. We engineer vehicle-specific kits for most Ford, Chevy, GMC, Ram, Toyota, and Nissan full-size trucks with 5.5-foot, 6.5-foot, and 8-foot bed lengths.
The system maintains full tailgate swing and clearance for spray-in bed liners up to 1/4 inch thick. Our accessories and parts catalog includes adapter kits for trucks with existing bed rail accessories like tie-down cleats or stake pocket mounts, ensuring compatibility across a wide range of configurations. If your truck uses an over-the-rail tonneau or fifth-wheel hitch, contact our fit specialists to confirm clearance before ordering.
Tonneau Covers & Bed Management Solutions
What people are saying
BAKFlip CS System Questions
No, the system operates in two modes. In cover mode, the panels lie flat to seal and protect the bed. In rack mode, you fold the panels upright against the cab to expose the telescoping cross rails for cargo. The transition between modes takes under 30 seconds and requires no tools or removal of components.
We rate the integrated rack at 500 pounds of evenly distributed load. This capacity accommodates extension ladders, kayaks, canoes, lumber bundles, and rooftop cargo boxes. Always secure loads with tie-down straps and distribute weight across both cross rails to maintain stability and safety.
No drilling is required. The system mounts using clamp-on brackets that attach to your factory bed rails, preserving the truck's paint and resale value. Installation takes 45-60 minutes with basic hand tools and does not affect bed liner compatibility or tailgate function.
Yes, the CS is compatible with most spray-in bed liners up to 1/4 inch thick. The clamp brackets include adjustable spacers to accommodate liner thickness while maintaining a secure fit. If your liner is thicker than 1/4 inch or has unusual texture, contact our fit team to confirm compatibility before ordering.
The BAKFlip CS features EPDM rubber gaskets at every panel joint and integrated drain channels that route water toward the tailgate. The system keeps the bed dry through rain, snow, and car washes, though like all tonneau covers it is not submersion-proof. Regular cleaning of drain channels ensures optimal performance.
Yes, the system is designed for full tailgate swing and function. The cover locks at the tailgate using an integrated rotary latch, and you can open the tailgate with the panels folded or in rack mode. The low-profile mounting inside the bed rails does not interfere with tailgate operation or bed access.
We offer vehicle-specific kits for most full-size trucks with 5.5-foot, 6.5-foot, and 8-foot bed lengths. Applications include Ford F-150/F-250, Chevy Silverado, GMC Sierra, Ram 1500/2500, Toyota Tundra, and Nissan Titan. Verify your exact year, make, model, and bed length before ordering to ensure proper fitment.