BAKFlip MX4 Tonneau Cover for Ford Maverick
We designed the BAKFlip MX4 specifically for the compact bed dimensions of the Ford Maverick, delivering truck owners a hard folding tonneau cover that combines security, weather resistance, and full bed access in one low-profile package. The matte black aluminum panels fold open in sections, allowing you to haul taller cargo without removing the entire cover.
Our patented hinge system lets you configure the cover in multiple positions—fully closed for maximum security, partially open to accommodate ladders or bikes, or completely folded against the cab for unrestricted loading. Installation takes under an hour with basic hand tools and our proprietary clamp system that requires no drilling or modification to your Maverick's bed rails.
- Matte finish aluminum panels rated to support 300 lbs of evenly distributed snow load
- Exclusive dual-action tailgate seal prevents water intrusion at the rear bed edge
- Folds completely open to rest against the cab, preserving full bed length access
- Clamp-on mounting system installs in 45-60 minutes with no drilling required
- Automatic latching at each panel prevents accidental opening during highway driving
Aluminum Construction & Weather Performance
We build every BAKFlip MX4 panel from marine-grade aluminum with a powder-coated matte finish that resists UV fading and corrosion from road salt. The four-panel design uses our exclusive FRP (Fiberglass Reinforced Polymer) substructure to create a rigid surface that won’t sag or warp under snow loads up to 300 pounds.
Each seam between panels features EPDM rubber gaskets that compress when the cover closes, forming a continuous weather seal from cab to tailgate. Our dual-action tailgate seal system employs both a vertical compression seal and a horizontal wiper blade, creating two barriers against rain and snow that might otherwise migrate into the bed during heavy weather or highway speeds.
Folding Configuration & Bed Access Options
Multiple Load Positions
The BAKFlip MX4 for Ford Maverick divides into four equal panels that fold in pairs, giving you three primary configurations. Close all panels for a sealed, lockable bed. Fold the rear two panels upright to create a 60/40 split that accommodates items like toolboxes or coolers while maintaining weather protection over the front half of your bed.
For maximum vertical clearance, fold all four panels completely open against the rear cab window—this position preserves your full 54.4-inch bed length while allowing tall cargo like bicycles, furniture, or appliances to stand upright. The cover remains attached during this full-open configuration, so you never need to remove and store loose panels.
Installation Process for Ford Maverick Models
We ship the BAKFlip MX4 pre-assembled in its folded configuration, so you won’t spend time connecting panels or adjusting hinge tension before installation. Our clamp-on mounting system attaches directly to the Maverick’s factory bed rails using eight adjustable clamps—four per side—that tighten with a standard 9/16-inch socket.
Position the cover assembly on your truck bed, ensuring equal overhang on both driver and passenger sides. Hand-tighten each clamp to hold the cover in place, then use a torque wrench to apply 10-12 ft-lbs to each fastener in a cross-pattern sequence. This ensures even pressure distribution and prevents the rails from twisting.
More Hard Folding Tonneau Covers for Ford Trucks
What people are saying
Common Questions About the MX4 for Ford Maverick
Yes, we designed this MX4 specifically for 2022-present Ford Maverick trucks with the standard 4.5-foot bed. The bed dimensions remained consistent across all Maverick model years currently in production, so our single SKU covers every year from the Maverick's introduction through the current lineup.
If Ford releases an extended cab or longer bed variant in future model years, we will engineer a separate MX4 configuration with updated panel sizing and clamp spacing to match those new bed dimensions.
Yes, the BAKFlip MX4 for Ford Maverick allows full tailgate operation in any cover position. When the cover is closed and latched, releasing your Maverick's factory tailgate latch automatically lifts the rear tonneau panel approximately one inch, creating clearance to drop the tailgate without forcing the hinge or stressing the aluminum.
This automatic lift mechanism is built into our latch design and requires no manual adjustment. Close the tailgate and press down on the rear panel to re-engage the latch and restore the weather seal.
The low-profile design of the BAKFlip MX4 improves aerodynamics by reducing turbulent airflow in the open bed, which can result in a 1-2% improvement in highway fuel economy compared to driving with an uncovered bed. The exact gain depends on your typical highway speed and whether you frequently drive in crosswinds.
Because the cover sits flush within the bed rails rather than above them, it creates a smooth transition from the cab roofline to the tailgate, minimizing drag. Owners who track fuel consumption typically report seeing the most noticeable difference on sustained highway trips above 60 mph.
Yes, the BAKFlip MX4 installs successfully over most spray-in bed liners, including LINE-X, Rhino Linings, and Ford's factory spray-in option. Our clamp system accounts for the additional thickness of spray-in liners by including adjustable spacers that maintain proper rail alignment.
During installation, you may need to apply slightly more torque to the clamp fasteners to compress the liner material and achieve a secure mount. If your liner extends up and over the bed rail caps, you may need to trim approximately 0.25 inches from the rail cap edge to allow the MX4 rails to sit flush—our installation instructions include a diagram showing the exact trim location for Maverick bed liners.
We back the BAKFlip MX4 for Ford Maverick with a three-year warranty against defects in materials and workmanship, covering the aluminum panels, hinge assemblies, latch mechanisms, and mounting hardware. This warranty protects the original purchaser and remains valid as long as you own the vehicle the cover was originally installed on.
The warranty covers structural failures, coating defects, and hardware corrosion, but does not include damage from accidents, improper installation, or modifications to the cover. Wear items like rubber seals and drain tubes are covered for the first 12 months, after which replacement seal kits are available separately through our parts department.
The BAKFlip MX4 reduces interior bed height by approximately 1.25 inches when fully closed, measured from the top of the bed rail to the underside of the cover panels. For the Ford Maverick's bed, this leaves you with roughly 17.75 inches of vertical clearance from the bed floor to the cover's interior surface.
This minimal intrusion allows you to store standard toolboxes, coolers, and cargo bins without modification. When you need full vertical access for taller items, fold the panels completely open against the cab to restore the Maverick's factory 19-inch bed depth from floor to rail.
Yes, you can safely drive your Ford Maverick through touchless automatic car washes with the BAKFlip MX4 fully closed and latched. The latch system and EPDM seals are designed to withstand the water pressure and detergent spray used in these facilities.
We recommend avoiding brush-style car washes, as the rotating brushes can catch on the panel seams and potentially damage the rubber gaskets or apply uneven pressure to the aluminum surface. Hand washing or touchless systems are the safest options for preserving the matte finish and seal integrity over the long term.